Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast


Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration.
| Network Name (SSID) |
|---|
| Communication Mode | Authentication Method | Encryption Mode | Network Key |
|---|
| Infrastructure | Open System | NONE | - |
| WEP |
| Shared Key | WEP |
| WPA/WPA2-PSK | AES |
| TKIP (TKIP is supported for WPA-PSK only.) |
For example:
| Network Name (SSID) |
|---|
| HELLO |
| Communication Mode | Authentication Method | Encryption Mode | Network Key |
|---|
| Infrastructure | WPA2-PSK | AES | 12345678 |
or
to select the Network option, and then press OK.
or
to select the WLAN option, and then press OK.
or
to select the Setup Wizard option, and then press OK.
to select On.
or
to select the <New SSID> option, and then press OK.
or
to select the Infrastructure option, and then press OK.
or
to select the Authentication Method you want, and then press OK. If you selected the Open System option, press
or
to select the Encryption Type None or WEP, and then press OK.
If you selected the WEP option for Encryption Type, enter the WEP key, and then press OK.
If you selected the WPA/WPA2-PSK option, press
or
to select the Encryption Type TKIP+AES or AES, and then press OK.
Enter the WPA key, and then press OK.
. To cancel, press
. For Windows®:
You have completed the wireless network setup. To install drivers and software necessary for operating your device, click Install Printer Driver on the Installer CD-ROM's Top Menu page.
For Macintosh:
You have completed the wireless network setup. Go to the download page for your model on the Fuji Xerox website at http://www.fujixeroxprinters.com to install drivers and software necessary for operating your device.
Go to top of page